Explore comprehensive tree care solutions to nurture and maintain green spaces effortlessly. From pruning tools and tree care equipment to expert advice on arboriculture, find everything you need to promote tree health and preserve landscapes. Elevate your tree care practices with quality products and guidance, ensuring the vitality and beauty of your trees.
Brands:
|
|
-
EEGER BEEVER™ 1621 BRUSH CHIPPER
The compact yet high-capacity Eeger Beever 1621 chipper stands as the go-to choice for residential tree services, utility line clearing, vegetation management, maintenance contractors, and municipalities, offering both efficiency and economy in its design. Its 8.2 lb., 6″ (3.7 kg, 15.2 cm) channel frame rails strike a balance between structural strength and low unit weight, ensuring durability without sacrificing portability.
Equipped with the powerful TorqMax™ top feed wheel compression system, the 1621 delivers remarkable chipping performance. Its 32.3ci (529.3 cubic cm) hydraulic motor generates over 3,400 lb/ft (7,530 kg/m) of material pulling force, while the 18″ (45.72 cm) diameter dual feed wheels with straight flow-through infeed design facilitate efficient material processing.
SPECIFICATIONS:
HEIGHT: 8’10”, 2.69 m
WIDTH: 6’11”, 2.1 m
LENGTH: 16’5″, 5 m
GROSS WEIGHT (APPROXIMATE): 7,200 lb, 3,266 kg
SUSPENSION: 8,000 lb Torflex, 3,629 kg Torflex
INFEED OPENING (HEIGHT X WIDTH): 35″ x 59″, 88.9 x 149.9 cm
THROAT OPENING (HEIGHT X WIDTH): 16″ x 20.5″, 40.6 x 52.1 cm
DRUM (WIDTH X DIAMETER): 23.8″ x 21.4″, 60.3 x 54.3 cm
ENGINE: CAT, Perkins, or PSI
HORSEPOWER: 122.5–147 HP, 91.3–109.6 kW
FUEL CAPACITY: 32 gallons, 121.1 L
HYDRAULIC CAPACITY: 13 gallons, 49.2 L
FRAME: 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel
TIRES: (2) 215/75Rx17.5
HITCH: 2.5″ Pintle, 6.4 cm Pintle -
EEGER BEEVER 1418 BRUSH CHIPPER
Boasting power and portability, the Eeger Beever 1418 chipper stands as the prime choice for utility line clearing, residential tree services, rental yards, and municipalities, offering compactness and cost-efficiency in its design. Its 18″ (45.7 cm) diameter single top feed wheel, featuring a straight flow-through infeed design, effortlessly maneuvers over materials, diminishes drag, and boosts chipping efficiency, surpassing the constraints of comparable disc chippers.
SPECIFICATIONS:
- HEIGHT: 8’2″, 2.49 m
- WIDTH: 5’10”, 1.78 m
- LENGTH (TRANSPORT): 16’7″, 5.05 m
- LENGTH (OPERATING): 17’3″, 5.26 m
- GROSS WEIGHT (APPROXIMATE): 5,350 lb, 2,427 kg
- SUSPENSION: 7,000 lb Torflex, 3,175 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 33″ x 60″, 83.8 x 152.4 cm
- THROAT OPENING (HEIGHT X WIDTH): 14″ x 18″, 35.6 x 45.7 cm
- FEED WHEEL (WIDTH X DIAMETER): 11.5″ x 9″, 29.2 x 22.9 cm
- DISC (THICKNESS X DIAMETER): 2″ x 37″, 5.1 x 94 cm
- ENGINE: CAT, Perkins, or PSI
- HORSEPOWER: 49–145 HP, 36.5–108.1 kW
- FUEL CAPACITY: 24.5 gallons, 92.7 L
- HYDRAULIC CAPACITY: 9 gallons, 34 L
- FRAME: 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel
- TIRES: (2) 235/80Rx16
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
-
EEGER BEEVER 1415 BRUSH CHIPPER
Tailored for utility line clearing, residential tree services, rental yards, and municipalities, this potent and compact model boasts maneuverability as its forte. The Eeger Beever 1415 offers the convenience of tracks, making it suitable for right-of-way clearing, highway clean-ups, and accessing hard-to-reach areas where a self-propelled unit is necessary for material access. Its direct-driven dual feed wheel system, equipped with serrated teeth and a knife bar combination, alongside end cap ripper teeth, ensures positive material feeding and minimizes material wrapping around the feed wheel shaft, thereby enhancing feeding efficiency.
SPECIFICATIONS:
- HEIGHT: 8’5″ wheeled/8′ tracked, 2.56 m wheeled/2.44 m tracked
- WIDTH: 5’11” wheeled/6’3″ tracked, 1.8 m wheeled/1.9 m tracked
- LENGTH: 15’5″ wheeled/13’9″ tracked, 4.7 m wheeled/4.2 m tracked
- GROSS WEIGHT (APPROXIMATE): 5,500 lb wheeled/8,200 lb tracked, 2,495 kg wheeled/3,719 kg tracked
- SUSPENSION: 7,000 lb Torflex, 3,175 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 31″ x 60″, 78.7 x 152.4 cm
- THROAT OPENING (HEIGHT X WIDTH): 14″ x 15″, 35.6 x 38.1 cm
- DRUM (WIDTH X DIAMETER): 14.5″ x 21.4″, 36.8 x 54.3 cm
- ENGINE: CAT, Perkins, or PSI
- HORSEPOWER: 49–145 HP, 36.5–108.1 kW
- FUEL CAPACITY: 24.5 gallons, 92.7 L
- HYDRAULIC CAPACITY: 17 gallons, 64.4 L
- FRAME: 8.2 lb, 6″ channel wheeled/2″ x 4″ tubular tracked, 3.7 kg, 15.2 cm channel wheeled/5.1 cm x 10.2 cm tubular tracked
- TIRES: (2) 235/80Rx16
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
- OPTIONAL TRACKS: 400 mm Rubber Tracks
- TRACKS GROUND PRESSURE: 4.95 PSI, 34.1 kPa
- TRACKS GROUND SPEED (LOW/HIGH): 1.0/1.8 MPH, 1.6/2.9 km/h
-
EEGER BEEVER™ 1215 BRUSH CHIPPER
With its power and easily transportable design, the compact and economical Eeger Beever 1215 brush chipper is the ideal unit for utility line clearing, residential tree services, rental yards and municipalities. The dual-sided, chambered air impeller system increases chip-throwing velocity and reduces dust and material blowback out the infeed to pack more into the chip truck.
SPECIFICATIONSHEIGHT 9′, 2.74 m WIDTH 5’11”, 1.8 m LENGTH (TRANSPORT) 15’4″, 4.67 m LENGTH (OPERATING) 17’3″, 5.26 m GROSS WEIGHT (APPROXIMATE) 4,900 lb, 2,223 kg SUSPENSION 7,000 lb Torflex, 3,175 kg Torflex INFEED OPENING (HEIGHT X WIDTH) 31″ x 60″, 78.7 x 152.4 cm THROAT OPENING (HEIGHT X WIDTH) 12″ x 15″, 30.5 x 38.1 cm DRUM (WIDTH X DIAMETER) 14.2″ x 21.4″, 36.2 x 54.3 cm ENGINE CAT, Perkins or PSI HORSEPOWER 49–89 HP, 36.5–66.4 kW FUEL CAPACITY 24.5 gallons, 92.7 L HYDRAULIC CAPACITY 17 gallons, 64.4 L FRAME 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel TIRES (2) 235/80Rx16 HITCH 2.5″ Pintle, 6.4 cm Pintle -
Brush Chipper – M8D
Perfect for rental yards, landscapers, golf courses and pruning crews, the high-capacity Beever M8D Brush Chipper is easy to transport and operate. Plus, it’s the only chipper in its class to combine both a wide infeed chute opening and 1 1/4″ (3.17 cm) thick chipping disc for a greater chipping capacity than comparable models. The M8D has a 251-pound (114 kg) disc and shaft weight, which provides more inertia to power through material and continuously feed material.
With a single top feed wheel compression system and 32.3 ci hydraulic motor with spring-assisted down pressure, the M8D generates more than 2,300 lb./ft. (7,545 lb./m.) of material pulling force and approximately 1,000 lb./ft. (3,280 lb./m.) of combined down pressure to easily feed a variety of materials.
Like all Morbark equipment, the M8D is a long-lasting, durable machine backed by a world-class parts and service support team.
- Belt Drive – Direct drive with belt power transfer eliminates clutch components and over center belt tensioning systems, reducing problem areas and easing maintenance burdens.
- Infeed Chute – Infeed chute with 96-square-inch throat opening allows for easy material feeding and reduced trim labor and folds to reduce transport and storage length.
- 360° Swivel Discharge – 360° swivel discharge with adjustable chip deflector puts chips right where they’re needed without removing the chipper from the tow vehicle.
- Feed System – A top feed wheel compression system with spring-assisted down pressure easily breaks down a variety of materials.
General
Chipping Capacity: 8″ (20.32 cm)
Height: 7’4″ (2.35 m)
Width: 5’3″ (1.6 m)
Length (transport) : 12′ (3.66 m)
Length (operating): 13’10” (4.22 m)
Gross weight (approximate): 2,500 lbs. (1,135 kg)
Suspension: 2,500 lb. (1,135 kg) Torflex
Infeed opening: 33 ½” wide x 24 ½” high (85.09 cm x 62.23 cm)
Throat opening: 12″ wide x 8″ high (30.48 cm x 20.32 cm)
Feed wheel: 11 ½” wide x 9″ diameter (29.21 cm x 22.86 cm)
Disc dimensions: 1 ¼” thick x 28″ diameter (3.17 cm x 71.12 cm)
Engine: Kohler or Kubota
Horsepower: 35–44 HP (26—33 kW)
Fuel capacity (tank): 10 gallons (37.85 litre)
Hydraulic oil capacity: 10 gallons (37.85 litre)
Frame: 2″ x 4″ Tubular (5.08 cm x 10.16 cm)
Tires: (2) 185/75Rx14 – 8-ply
Hitch: 2″ Ball (5.08 cm)
Equipment Highlights
Direct drive with belt power transfer
Automatic feed system
Chipper disc with two 10 ½” x 4″ x 3/8″ (26.67 cm x 10.16 cm x 9.52 mm) dual‑edged chipper knives and four full-length, bolt-on, chip throwing paddles
Reversible feed works control bar and dual safety cables located within infeed chute
Pinned chipper hood access with integrated hood safety device to disconnect the start system when the chipper hood is opened and allow ease of disc maintenance.
3″ x 4″ (7.62 cm x 10.16 cm) tubular steel fixed length drawbar and 3/8″ (9.52 mm) thick safety chains with clasp hooks
The Morbark Paint System is a Super-Shield® topcoat and two-component, high-performance, isocyanate-free, urethane system. The topcoat is high-solids, low-VOC, and offers long-term color and UV protections, as well as resistance to a wide range of chemicals, pollutants, and natural weathering. The system utilizes automotive grade pigments in the Super-Shield topcoat to achieve outstanding color and gloss protection. The system has also been tested to meet many military-grade standards for long-term performance. (Super-Shield is a registered trademark of Cloverdale Paint Inc.)
Fuel tank sight gauge, drain plug and shut‑off valve
Hydraulic tank shut-off valve, drain plug, clean-out cover and vented filter head assembly with dipstick to check oil level
8D, 1400 CCA Battery
Options
- ChipSafe® Operator Safety Shield
- Variable speed flow control
- 2,500 lb. (1,135 kg) Torflex suspension axle with electric brake system, electric brake actuator and 185R14 tires with rims
- Custom paint and logo packages
- 2 ½” (6.35 cm) lunet ring
- Knife saver tool
- Engine stop on infeed
- Material pushing tool
- Spanish and English safety decals
SPECIFICATIONS MAY VARY WITH EQUIPMENT OPTIONS.
-
EEGER BEEVER 1922 BRUSH CHIPPER
Tailored to meet the demands of residential tree services, vegetation management, lot and land clearing, maintenance contractors, and municipalities, the Eeger Beever 1922 chipper amalgamates Morbark’s renowned strength into a more compact design. Weighing in at less than 10,000 lb (4,536 kg) (GVWR), it eliminates the necessity for additional transport licensing requirements, depending on the chosen options.
SPECIFICATIONS:
- HEIGHT: 9’4″, 2.84 m
- WIDTH: 7’8″, 2.34 m
- LENGTH: 18’3″, 5.56 m
- GROSS WEIGHT (APPROXIMATE): 9,550 – 11,500 lb, 4,332 – 5,216 kg
- SUSPENSION: 10,000 lb Torflex, 4,536 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 36″ x 59″, 91.4 x 149.9 cm
- THROAT OPENING (HEIGHT X WIDTH): 19″ x 21.3″, 48.3 x 54 cm
- DRUM (WIDTH X DIAMETER): 23.5″ x 37.4″, 59.7 x 94.9 cm
- ENGINE: CAT, GM, or Perkins
- HORSEPOWER: 165 – 174 HP, 123 – 129.8 kW
- FUEL CAPACITY: 44 gallons, 166.6 L
- HYDRAULIC CAPACITY: 26 gallons, 98.4 L
- FRAME: 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel
- TIRES: (2) 235/75Rx17.5
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
-
EEGER BEEVER™ 1821 BRUSH CHIPPER
Catering to the needs of residential tree services, utility line clearing, vegetation management, maintenance contractors, and municipalities, the Eeger Beever 1821 chipper offers exceptional capacity and productivity, surpassing others in its class with an array of standard features. Pioneering customer-inspired innovations enhance efficiency and safety while minimizing operational and maintenance expenses.
SPECIFICATIONS:
- HEIGHT: 8’11” wheeled/8’6″ tracked, 2.72 m wheeled/2.59 m tracked
- WIDTH: 7’3″ wheeled/7’10” tracked, 2.21 m wheeled/2.39 m tracked
- LENGTH: 18’1″ wheeled/16′ tracked, 5.51 m wheeled/4.88m tracked
- GROSS WEIGHT (APPROXIMATE): 8,900 lb wheeled/13,500 lb tracked, 4,037 kg wheeled/6,123 kg tracked
- SUSPENSION: 9,000 lb Torflex, 4,082 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 41″ x 59″, 104.1 x 149.9 cm
- THROAT OPENING (HEIGHT X WIDTH): 18″ x 20.5″, 45.7 x 52.1 cm
- DRUM (WIDTH X DIAMETER): 23.8″ x 30″, 60.3 x 76.2 cm
- ENGINE: CAT, Perkins, or PSI
- HORSEPOWER: 147–174 HP, 109.6–129.8 kW
- FUEL CAPACITY: 32 gallons, 121.1 L
- HYDRAULIC CAPACITY: 12 gallons wheeled/26 gallons tracked, 45.2 L wheeled/98.4 L tracked
- FRAME: 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel
- TIRES: (2) 235/75Rx17.5
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
- OPTIONAL TRACKS: 400mm Rubber Tracks
- TRACKS GROUND PRESSURE: 4.84 PSI, 33.4 kPa
- TRACKS GROUND SPEED (LOW/HIGH): 1.0/1.8 MPH, 1.6/2.9 km/h
-
EEGER BEEVER 1418 BRUSH CHIPPER
Combining power with portability, the Eeger Beever 1418 emerges as the ultimate solution for utility line clearing, residential tree services, rental yards, and municipalities. Its compact and cost-effective design makes it an ideal choice for various applications.
The Eeger Beever 1418 features an 18″ (45.7 cm) diameter single top feed wheel with a straight flow-through infeed design, allowing it to effortlessly navigate over material, reduce drag, and enhance chipping efficiency. This innovative design enables it to surpass the limitations typically associated with comparable disc chippers.
SPECIFICATIONS:
- HEIGHT: 8’2″, 2.49 m
- WIDTH: 5’10”, 1.78 m
- LENGTH (TRANSPORT): 16’7″, 5.05 m
- LENGTH (OPERATING): 17’3″, 5.26 m
- GROSS WEIGHT (APPROXIMATE): 5,350 lb, 2,427 kg
- SUSPENSION: 7,000 lb Torflex, 3,175 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 33″ x 60″, 83.8 x 152.4 cm
- THROAT OPENING (HEIGHT X WIDTH): 14″ x 18″, 35.6 x 45.7 cm
- FEED WHEEL (WIDTH X DIAMETER): 11.5″ x 9″, 29.2 x 22.9 cm
- DISC (THICKNESS X DIAMETER): 2″ x 37″, 5.1 x 94 cm
- ENGINE: CAT, Perkins, or PSI
- HORSEPOWER: 49–145 HP, 36.5–108.1 kW
- FUEL CAPACITY: 24.5 gallons, 92.7 L
- HYDRAULIC CAPACITY: 9 gallons, 34 L
- FRAME: 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel
- TIRES: (2) 235/80Rx16
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
-
EEGER BEEVER™ 2230 BRUSH CHIPPER
Designed to meet the demands of entry-level biomass production, lot and land clearing contractors, as well as large tree services, the Eeger Beever 2230 stands as a pinnacle of high-capacity, high-production chippers in its class. With an extensive range of standard features, it offers unparalleled versatility to cater to various needs.
The Eeger Beever 2230 is available in a wide array of configurations to suit different requirements. Opt for the two-speed, steel track undercarriage option with 4.24 psi (29.23 kPa) ground pressure for seamless maneuverability through challenging terrains. Enhance efficiency with the optional 5′ (1.5 m) infeed deck, ensuring hassle-free feeding of materials.
For in-woods chipping applications, the versatile and high-performance Forestry model, constructed with added durability in critical wear areas, delivers optimal performance. Alternatively, consider integrating a powerful Mor-Lift Model 150M hydraulic knuckleboom loader for enhanced material handling capabilities.
-
EEGER BEEVER™ 2131 BRUSH CHIPPER
Featuring an expansive capacity and remarkable high-production volume reduction capabilities, the Eeger Beever 2131 is tailor-made for various applications, including residential tree services, vegetation management, lot and land clearing, as well as maintenance contractors and municipalities. With an extensive list of options for customization and boasting more standard features than any other chipper in its class, the 2131 offers unmatched versatility.
For tasks requiring accessibility to hard-to-reach areas or right-of-way clearing, the Eeger Beever 2131 is also available in a tracked configuration, ensuring efficiency in highway cleanups and material access in challenging terrains. Additionally, an optional loader further enhances its functionality.
SPECIFICATIONS:
- HEIGHT: 9’6″ wheeled/8’9.6″ tracked, 2.9 m wheeled/2.68 m tracked
- WIDTH: 7’7″ wheeled/7’11.4″ tracked, 2.31 m wheeled/3.64 m tracked
- LENGTH: 21’2″ wheeled/17’4.2″ tracked, 6.45 m wheeled/5.29 m tracked
- GROSS WEIGHT (APPROX., SINGLE AXLE): 11,000 lb, 4,990 kg
- GROSS WEIGHT (APPROX., TANDEM AXLE): 12,200 lb, 5,534 kg
- GROSS WEIGHT (APPROX., TRACKED): 15,000 lb, 6,804 kg
- SUSPENSION (SINGLE AXLE): (1) 10,000 lb Torflex, (1) 4,536 kg Torflex
- SUSPENSION (TANDEM AXLE): (2) 8,000 lb Torflex, (2) 3,629 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 36″ x 59″ wheeled/38″ x 65″ tracked, 91.4 x 149.9 cm wheeled/96.5 cm x 165.1 cm tracked
- THROAT OPENING (HEIGHT X WIDTH): 20.5″ x 31″, 52.1 x 78.7 cm
- DRUM (WIDTH X DIAMETER): 23.5″ x 37.4″, 59.7 x 94.9 cm
- ENGINE: CAT, GM, or Perkins
- HORSEPOWER: 147–275 HP, 109.6–205 kW
- FUEL CAPACITY: 60 gallons, 227.1 L
- HYDRAULIC CAPACITY: 41 gallons wheeled/ 44 gallons tracked, 155.2 L wheeled/166.5 L tracked
- FRAME: 2″ x 6″ Tubular, 5.1 x 15.2 cm Tubular
- TIRES: 235/75Rx17.5
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
- OPTIONAL TRACKS: 400 mm Rubber or Steel Tracks
- TRACKS GROUND PRESSURE: 4.84 PSI, 33.4 kPa
- TRACKS GROUND SPEED (LOW/HIGH): 1.0/1.8 MPH, 1.6/2.9 km/h
-
Rayco RG80-R STUMP CUTTER
Rayco RG80-R Stump Cutter
The RG80-R boasts an impressive 85-hp (63.4 kW) Ford engine paired with a hydrostatic cutter wheel drive, ensuring powerful performance in treecare operations. With Command Cut technology, operators can independently adjust the swing speed while maintaining maximum torque and horsepower, enhancing efficiency and precision.
Its propel system offers both Hi and Low travel speeds, along with an integrated “creep mode” for precise handling during cutting tasks. The RG80 features a wireless remote control that is meticulously sealed against dust, water, and other elements, ensuring durability and reliability in various conditions.
Furthermore, its wide hydraulic backfill blade streamlines cleanup efforts, saving valuable time, and can be conveniently folded in for easy passage through gates. For added convenience, it is available with a custom Rayco TRG Trailer, offering seamless transport and storage solutions.
