-
EEGER BEEVER 1415 BRUSH CHIPPER
Tailored for utility line clearing, residential tree services, rental yards, and municipalities, this potent and compact model boasts maneuverability as its forte. The Eeger Beever 1415 offers the convenience of tracks, making it suitable for right-of-way clearing, highway clean-ups, and accessing hard-to-reach areas where a self-propelled unit is necessary for material access. Its direct-driven dual feed wheel system, equipped with serrated teeth and a knife bar combination, alongside end cap ripper teeth, ensures positive material feeding and minimizes material wrapping around the feed wheel shaft, thereby enhancing feeding efficiency.
SPECIFICATIONS:
- HEIGHT: 8’5″ wheeled/8′ tracked, 2.56 m wheeled/2.44 m tracked
- WIDTH: 5’11” wheeled/6’3″ tracked, 1.8 m wheeled/1.9 m tracked
- LENGTH: 15’5″ wheeled/13’9″ tracked, 4.7 m wheeled/4.2 m tracked
- GROSS WEIGHT (APPROXIMATE): 5,500 lb wheeled/8,200 lb tracked, 2,495 kg wheeled/3,719 kg tracked
- SUSPENSION: 7,000 lb Torflex, 3,175 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 31″ x 60″, 78.7 x 152.4 cm
- THROAT OPENING (HEIGHT X WIDTH): 14″ x 15″, 35.6 x 38.1 cm
- DRUM (WIDTH X DIAMETER): 14.5″ x 21.4″, 36.8 x 54.3 cm
- ENGINE: CAT, Perkins, or PSI
- HORSEPOWER: 49–145 HP, 36.5–108.1 kW
- FUEL CAPACITY: 24.5 gallons, 92.7 L
- HYDRAULIC CAPACITY: 17 gallons, 64.4 L
- FRAME: 8.2 lb, 6″ channel wheeled/2″ x 4″ tubular tracked, 3.7 kg, 15.2 cm channel wheeled/5.1 cm x 10.2 cm tubular tracked
- TIRES: (2) 235/80Rx16
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
- OPTIONAL TRACKS: 400 mm Rubber Tracks
- TRACKS GROUND PRESSURE: 4.95 PSI, 34.1 kPa
- TRACKS GROUND SPEED (LOW/HIGH): 1.0/1.8 MPH, 1.6/2.9 km/h
-
EEGER BEEVER 1418 BRUSH CHIPPER
Boasting power and portability, the Eeger Beever 1418 chipper stands as the prime choice for utility line clearing, residential tree services, rental yards, and municipalities, offering compactness and cost-efficiency in its design. Its 18″ (45.7 cm) diameter single top feed wheel, featuring a straight flow-through infeed design, effortlessly maneuvers over materials, diminishes drag, and boosts chipping efficiency, surpassing the constraints of comparable disc chippers.
SPECIFICATIONS:
- HEIGHT: 8’2″, 2.49 m
- WIDTH: 5’10”, 1.78 m
- LENGTH (TRANSPORT): 16’7″, 5.05 m
- LENGTH (OPERATING): 17’3″, 5.26 m
- GROSS WEIGHT (APPROXIMATE): 5,350 lb, 2,427 kg
- SUSPENSION: 7,000 lb Torflex, 3,175 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 33″ x 60″, 83.8 x 152.4 cm
- THROAT OPENING (HEIGHT X WIDTH): 14″ x 18″, 35.6 x 45.7 cm
- FEED WHEEL (WIDTH X DIAMETER): 11.5″ x 9″, 29.2 x 22.9 cm
- DISC (THICKNESS X DIAMETER): 2″ x 37″, 5.1 x 94 cm
- ENGINE: CAT, Perkins, or PSI
- HORSEPOWER: 49–145 HP, 36.5–108.1 kW
- FUEL CAPACITY: 24.5 gallons, 92.7 L
- HYDRAULIC CAPACITY: 9 gallons, 34 L
- FRAME: 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel
- TIRES: (2) 235/80Rx16
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
-
EEGER BEEVER 1418 BRUSH CHIPPER
Combining power with portability, the Eeger Beever 1418 emerges as the ultimate solution for utility line clearing, residential tree services, rental yards, and municipalities. Its compact and cost-effective design makes it an ideal choice for various applications.
The Eeger Beever 1418 features an 18″ (45.7 cm) diameter single top feed wheel with a straight flow-through infeed design, allowing it to effortlessly navigate over material, reduce drag, and enhance chipping efficiency. This innovative design enables it to surpass the limitations typically associated with comparable disc chippers.
SPECIFICATIONS:
- HEIGHT: 8’2″, 2.49 m
- WIDTH: 5’10”, 1.78 m
- LENGTH (TRANSPORT): 16’7″, 5.05 m
- LENGTH (OPERATING): 17’3″, 5.26 m
- GROSS WEIGHT (APPROXIMATE): 5,350 lb, 2,427 kg
- SUSPENSION: 7,000 lb Torflex, 3,175 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 33″ x 60″, 83.8 x 152.4 cm
- THROAT OPENING (HEIGHT X WIDTH): 14″ x 18″, 35.6 x 45.7 cm
- FEED WHEEL (WIDTH X DIAMETER): 11.5″ x 9″, 29.2 x 22.9 cm
- DISC (THICKNESS X DIAMETER): 2″ x 37″, 5.1 x 94 cm
- ENGINE: CAT, Perkins, or PSI
- HORSEPOWER: 49–145 HP, 36.5–108.1 kW
- FUEL CAPACITY: 24.5 gallons, 92.7 L
- HYDRAULIC CAPACITY: 9 gallons, 34 L
- FRAME: 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel
- TIRES: (2) 235/80Rx16
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
-
EEGER BEEVER™ 1621 BRUSH CHIPPER
The compact yet high-capacity Eeger Beever 1621 chipper stands as the go-to choice for residential tree services, utility line clearing, vegetation management, maintenance contractors, and municipalities, offering both efficiency and economy in its design. Its 8.2 lb., 6″ (3.7 kg, 15.2 cm) channel frame rails strike a balance between structural strength and low unit weight, ensuring durability without sacrificing portability.
Equipped with the powerful TorqMax™ top feed wheel compression system, the 1621 delivers remarkable chipping performance. Its 32.3ci (529.3 cubic cm) hydraulic motor generates over 3,400 lb/ft (7,530 kg/m) of material pulling force, while the 18″ (45.72 cm) diameter dual feed wheels with straight flow-through infeed design facilitate efficient material processing.
SPECIFICATIONS:
HEIGHT: 8’10”, 2.69 m
WIDTH: 6’11”, 2.1 m
LENGTH: 16’5″, 5 m
GROSS WEIGHT (APPROXIMATE): 7,200 lb, 3,266 kg
SUSPENSION: 8,000 lb Torflex, 3,629 kg Torflex
INFEED OPENING (HEIGHT X WIDTH): 35″ x 59″, 88.9 x 149.9 cm
THROAT OPENING (HEIGHT X WIDTH): 16″ x 20.5″, 40.6 x 52.1 cm
DRUM (WIDTH X DIAMETER): 23.8″ x 21.4″, 60.3 x 54.3 cm
ENGINE: CAT, Perkins, or PSI
HORSEPOWER: 122.5–147 HP, 91.3–109.6 kW
FUEL CAPACITY: 32 gallons, 121.1 L
HYDRAULIC CAPACITY: 13 gallons, 49.2 L
FRAME: 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel
TIRES: (2) 215/75Rx17.5
HITCH: 2.5″ Pintle, 6.4 cm Pintle -
EEGER BEEVER™ 1821 BRUSH CHIPPER
Catering to the needs of residential tree services, utility line clearing, vegetation management, maintenance contractors, and municipalities, the Eeger Beever 1821 chipper offers exceptional capacity and productivity, surpassing others in its class with an array of standard features. Pioneering customer-inspired innovations enhance efficiency and safety while minimizing operational and maintenance expenses.
SPECIFICATIONS:
- HEIGHT: 8’11” wheeled/8’6″ tracked, 2.72 m wheeled/2.59 m tracked
- WIDTH: 7’3″ wheeled/7’10” tracked, 2.21 m wheeled/2.39 m tracked
- LENGTH: 18’1″ wheeled/16′ tracked, 5.51 m wheeled/4.88m tracked
- GROSS WEIGHT (APPROXIMATE): 8,900 lb wheeled/13,500 lb tracked, 4,037 kg wheeled/6,123 kg tracked
- SUSPENSION: 9,000 lb Torflex, 4,082 kg Torflex
- INFEED OPENING (HEIGHT X WIDTH): 41″ x 59″, 104.1 x 149.9 cm
- THROAT OPENING (HEIGHT X WIDTH): 18″ x 20.5″, 45.7 x 52.1 cm
- DRUM (WIDTH X DIAMETER): 23.8″ x 30″, 60.3 x 76.2 cm
- ENGINE: CAT, Perkins, or PSI
- HORSEPOWER: 147–174 HP, 109.6–129.8 kW
- FUEL CAPACITY: 32 gallons, 121.1 L
- HYDRAULIC CAPACITY: 12 gallons wheeled/26 gallons tracked, 45.2 L wheeled/98.4 L tracked
- FRAME: 8.2 lb, 6″ channel, 3.7 kg, 15.2 cm channel
- TIRES: (2) 235/75Rx17.5
- HITCH: 2.5″ Pintle, 6.4 cm Pintle
- OPTIONAL TRACKS: 400mm Rubber Tracks
- TRACKS GROUND PRESSURE: 4.84 PSI, 33.4 kPa
- TRACKS GROUND SPEED (LOW/HIGH): 1.0/1.8 MPH, 1.6/2.9 km/h
